IR Remote For Nikon D5000 D3000 D90 D80 D60 D40X ML-L3

  • SKU:
  • Wishlist:

    To add this product to your wish list you must Login or Register.


IR Remote For Nikon D5000 D3000 D90 D80 D60 D40X ML-L3


  • This remote control will help you take steadier photos from distance away.  The compatible camera has a build in infrared receiver for that remote triggering device.  Use this remote control as a remote shutter release for self portraits or to present blur caused by camera shake. 
  • 100% compatible with Nikon ML-L3 infrared remote control.
  • Compatible models:Nikon D5000 D3000 D90, D80, D70s, D70, D60, D50, D40x, D40.
  • Easy-to-replace CR2025 lithium battery.
  • Operating temperature : 5 °C to 40 °C (40 °F to 105 °F) .
  • Typical Battery Life : up to 2 years,10,000 exposures .
  • Operation Distance: 1cm - 10 meter (30 feet).
  • Dimensions: 86mm x 40mm x 6mm

User Guide
To Use the Remote Control

  • Mount the camera on a tripod (recommended) or place the camera on a stable, level surface.
  • Press the button and rotate main command dial until (delayed remote) or (quick response remote) is displayed in the control panel.
  • Aim the transmitter on the remote control at the infrared receiver on the camera (usually within +/- 20 degree of the lens axis, from the left to the right and from the top to the bottom) and press the shutter-release button on the remote control (when using the remote outdoors, make sure that the subject is not backlit and that the line of site between the transmitter and the infrared receiver is not blocked by the lens or other obstacles).
  • How the camera focuses and shoots depends on the option selected for your camera's custom setting. For further information, check your camera's manual.
  • Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the front end of the remote control when operating.

To Replace the Battery

  • The remote control is powered by a three-volt CR2025 lithium battery which is already included in.
  • After sliding the latch in the direction shown to unlatch the battery holder,remove the holder.
  • Remove the battery from the battery holder.
  • Insert a fresh battery with the face marked "+" on top.
  • Slide the battery holder into the remote until the latch clicks into place.



Care and Storage

  • When the remote contol is not used for an extend period time,please remove the battery from the remote control.
  • Do not leave the remote control any place exposed to excessive heat,humidity.
  • Do not leave remote contol on or near a television,refrigerator,or other appliance with a magnetic field.
  • Keep out of Reach of Children

Order included
(1) 1x Infrared Remote Controller
(2)1x CR2025 Battery