Lanparte LA3D Camera Handheld 3-Axis Gimbal Stabilizer for Gopro 3,3+,4

  • SKU:
  • Wishlist:

    To add this product to your wish list you must Login or Register.


This item is on Backorder,and We will ship in 7-14 business days.

The newest Lanparte LA3D 3-Axis Detachable Wired Control Gimbal is specially designed for Gopro, SJCAM, Sony and other Sports Cameras. The gimbal platform is detachable, it can be either connected with the gimbal handle for handheld, or with the control cable for wired controlling. With it you can easily realize accurate control and stable and smooth move!



- Two applications modes: Handheld and wired controlling.

- GoPro standard mount.

- Anti-skid silica gel handle

- 3-Axis stabilized gimbal system.

- High accurate control makes stable and smooth.

- With standard 1/4'' thread underneath to install other accessories.

- With rechargeable 900mAh Li-on battery and battery charger.

- It can be upgraded to wireless controlling

- With Micro USB port for setting and firmware upgrade

- Compatible with: GoPro 3, GoPro 4, GoPro session, SJCAM,XIAOMI, Sony HD-AS20, AS200V, AS30V, AS100V, HDR-AZ1, FDR-X1000V etc. (Some cameras need to buy other accessories. )



  • 1. Standby mode: Press the power button to enter the standby mode. When in standby mode the signal light will turn blue and blink at interval.
  • 2. Operating mode: To activate operating mode press ''mode'' for 3 seconds. To go back to standby mode press ''mode'' again for 3 seconds.
  • 3. Reverse mode: In standby mode press ''right'' button for 5 seconds. Flashing red light indicates reverse mode is activated.
  • 4. Reset unit: In standby mode press ''down'' button for 5 seconds, a red light blinks and all setting are restored to factory default.
  • 5. Sensor calibration: In standby mode press ''left'' button for 5 seconds and a green light starts blinking. Once the calibration is done the green light turns to red. (Balance the platform before calibration.)



  • 1. Make sure install GoPro before connecting power.
  • 2. Ensure that the prongs are in contact with each other before tightening the locking knob.
  • 3. When the power is below 25%, it will keep flashing, for better result change the battery, as it might affect the stability of the platform.


Mode Switching:

Operating Mode

Activating By

Mode Indicator

Locking Axis

Control Buttons

Following Mode

Press Once



LEFT and RIGHT adjust roll axis

Semi-following Mode

Press Twice


Pitch & Roll

UP and DOWN adjust pitch axis

Locking Mode

Press Three Times


Pitch & Roll & Yaw

UP and DOWN adjust pitch axis, LEFT and RIGHT adjust yaw axis



  • Brand: LanParte
  • Model: LA3D
  • Material: Aluminum
  • Pitch Angle: ±130°
  • Roll Angle: ±40°
  • Yaw Angle: ±150°
  • Operating Voltage: 6.5V-12.6V
  • Operating Current: Standard 120Ma
  • Battery: 900mAh 18350 Li-on Battery
  • Battery Operating Time: 4H
  • Operating Temperature: -10°~ 40°
  • Item Dimensions: 274x117x93mm
  • Net Weight: 345g (Battery and camera not included)


Package Included:

  • 1 x 3-Axis Handheld Gimbal Platform
  • 1 x Gimbal Handle
  • 2 x 18350 Li-on Battery
  • 1 x Battery Extender
  • 1 x Detachable Control Cable (1.5m)
  • 1 x Micro USB Camera Charging Cable
  • 1 x Micro USB Battery Charging Cable
  • 1 x Battery Charger