Godox X1F 2.4GHz TTL Wireless Flash Trigger For Fujifilm Compatible with AD360II TT685F AD200 TT350F Only Transimitterr
Godox TTL wireless flash trigger X1F applies to Fuji cameras. Featuring multi-channel triggering, stable signal transmission, and sensitive reaction, it can be used to trigger camera shutter, studio flash and camera flash.
Built-in 2.4G Wireless Transmission
Built-in 2.4G wireless transmission provides 100 further transmission distance and creative triggering methods.
Fully Supporting TTL Functions
Support for TTL II autoflash, 1/1800s High-speed Sync, Second Curtain Sync,Flash Exposure Compensation, Modeling Flash, etc.
Wireless Remote Control and Grouping System
With GR group flash and wireless grouping system (max. 5 groups & 32 channels) and triggering the flash.
Big and Clear LCD Panel
Transmitter and receiver both have backlight LCD panel to offer convenient operation.
More Functions
Specifications
Model | X1F |
Type | For Fuji |
Compatible Cameras | Fuji cameras |
Support for the cameras that have PC sync socket | |
Builted-in remote system | 2.4G Wireless Transmission |
Modulation mode | MSK |
Power supply | 2 x AA batteries |
Exposure Control | |
Manual flash | Yes |
TTL autoflash | TTL II |
TTL Control | |
Synchronization delay set | Yes |
Flash exposure compensation | Yes, ±3 stops in 1/3 stop increments |
Flash exposure lock | Yes |
Focus assist | Yes |
Second curtain sync | Yes(Setting on the camera) |
Wireless Flash | |
Wireless function | In TTL mode, Ratio Off |
In M mode, Flash Ratio (A B C) | |
Support for GR group flash, and A~E group can set their flash mode separately | |
Controllable slave group | In the GR grouping mode, 5 (A/B/C/D/E) |
In the Ratio grouping mode, 3 (A/B/C) | |
Transmission range (approx.) | > 100m |
Channel | 32 |
Others | |
Synchronization delay set | Yes (0~10ms, use 100us as the unit) |
Modeling Flash | ON/OFF |
ZOOM setting | Adjust the flash's focal length though the transmitter |
LCD panel | Wide LCD panel, backlight on/off |
Output interface | Transmitter: use a PC cord to input and output; |
Receiver: use a 2.5mm sync cord to output | |
Firmware upgrade | Use the Micro USB port to upgrade |
Memory function | Settings will be stored 2 seconds after last operation and recover after a restart |
Dimension/ Weight for Transmitter | 72 x 75 x 52 mm / 100 g |
Dimension / Weight for Receiver | 70 x 65 x 47 mm / 70 g |
What is included